Antigen Detection Test Kit IgM/IgG Test Kit Rapid Test Kit for Wholesale
Product Info:
(1) Portable: No instruments required for visual inspection
(2) Simple: Simple operation,easy to use
(3) Fast: 20-30 minutes to read the results
Patient demographics (gender, age, time elapsed since onset of symptoms) are available for
the 321samples used in the analysis. The table below shows the positive results broken down by
age of the patient:
NOTE: The package insert must be read carefully prior to use and should be carefully followed.
Reliability of assay results cannot be guaranteed if there are any deviations from the instructions
in this package insert.
The test method was colloidal gold. Please read the manual and the instrument operation manual
carefully before use.
1.Open the package and take out the test card.
2.Place the extraction tube on the workbench. The swab extractor bottle (R1) is pressed vertically
downward to allow the solution to drip freely into the extractor tube without touching the edge
of the tube. Add 6 drops of R1 to the extractor tube.
3.Put the swab specimen into the extraction tube, rotate the swab for about 10 seconds, and
press the swab head against the tube wall to release the antigen in the swab. Squeeze the swab
over the head to remove the swab so as to remove as much liquid as possible from the swab.
Dispose of swabs according to biohazard waste disposal method.
4.Install the beater on the extraction tube, put two drops into the specimen hole of the test card,
and start the timer.
5.Read the results within 20 minutes. Strong positive results can be reported within 20 minutes,
however, negative results must be reported after 20 minutes, and the results after 30 minutes are
no longer valid
Precations:
(1)Read the instructions carefully before using the kit, and strictly control the reaction time. If you
do not follow the instructions, you will get inaccurate results.
(2)The specimen shall be tested in a laboratory with certain conditions. All specimens and
materials during testing should be handled in accordance with the laboratory practice for
infectious diseases.
(3)Guard against moisture, do not open the aluminum platinum bag before it is ready for testing.
Do not use the aluminum foil bag when it is damaged or the test card is damp.
(4)Please use it within the validity period.
(5)Balance all reagents and specimens to room temperature before use.
(6)Do not replace the components in this kit with components in other kits.
(7)Do not dilute the specimen for testing, otherwise you may get inaccurate results.
(8)The kit shall be stored in strict accordance with the conditions specified in this manual. Please
do not store the kit under freezing conditions.
(9)The test methods and results must be interpreted in strict accordance with this specification.
(10)Negative results will occur with this kit if the novel corona virus antigen in the specimen falls
below the minimum detection limit for this kit.
Product Image:
Product Image: